Clearview CVCA045 Primo Powder Water Conditioner, 45 lb Pail Wholesale – Opentip

Description

Manufacturer Part Number: CVCA045

Part #: ORQCVCA045

MFG #: CVCA045

DIRECTIONS FOR USE:

This product should be used in your startup program when filling your new pool or refilling with fresh water at any time. The following steps will precondition your pool water properly for a chlorine feeding program.

1. Superchlorinate pool water by adding a EPA registered chlorinating product as prescribed on labels.
2. Bring pH of pool water to range of 7.2 to 7.6 on your test kit.
3. Add this product to skimmer. Make sure filter is clean with full pressure drop, and recirculate water continuously for 24 hours to dissolve properly.
4. Add this product at the rate of 1 pound for each 4,000 gallons of pool water to provide 30 ppm of isocyanuric acid. Maintain an isocyanuric acid level of 30 to 50 ppm using a suitable test kit.
5. If EPA registered chlorine products with a “built-in” stabilizer are used with this product, then maintain a minimum of 1.5 ppm available chlorine residual. Otherwise, maintain an available chlorine residual of 1.0 to 1.5 ppm.
6. Start regular chlorine feeding program with an EPA registered granular chlorine or tablet chlorine as prescribed on label.

ACTIVE INGREDIENTS: ISOCYANURIC ACID – 99%, INERT INGREDIENTS – 1%

Brand: Clearview

Part Number: ORQCVCA045

Chemical Application:

Pool

Chemical Type:

Balancers

Container Type:

Pail

Form:

Powder